Configured an Nginx rule to proxy pass requests for the branded domain to sendgrid.net, while serving it using our site’s TLS certificate. I think the issue might be that you that you use https links, but you don’t have a “TLS pass-trough” set-up for them. It’s really poorly explained on Sendgrid’s branded links help page, but you can see a mention of it here. Basically you need something that will resolve TLS on your side and forward the request to sendgrid. It can be a proxy, as suggested on that help page, or i.e. a cloudfront distribution with a custom origin pointing to sendgrid and a certificate covering your branded link domain covered.

If you’re confident that your API keys are being passed correctly in your code, check if you have IP Access Management enabled. I have been trying to setup sendgrid on SQL Database Mail but all the time it says Cannot send mail to mail server. I will probably later on setup some code to where we CAN flip a Boolean value on a table to allow customers to send with their own email address (providing they can put in the SendGrid DNS Info).

I made it where our FROM email address is always email protected. I then take the customers email address and use it as a REPLY TO email address INSTEAD OF the FROM email address. By doing this we are now in compliance because we are sending from domain1.

Whether you’re writing an essay, an email, or a blog post, getting this small detail right is essential for maintaining proper grammar and spelling accuracy. Understanding the difference between “Chosing” and “Choosing” not only helps with precise communication but also ensures your writing adheres to standard English rules. Basically I can make the email work, and the moment I attempt to add an attachment it doesn’t send it. I tried different paths and different ways of writing the path, I am not sure what is going wrong, every single tutorial I have found shows it should work like this.

I change my API key settings to Full access in SendGrid portal. By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy. Find centralized, trusted content and collaborate around the technologies you use most.

The Wind of Change

• The Email Activity Feed as well as the Email Activity API endpoint are meant for troubleshooting specific issues and attaining detailed message metadata.
• I am adding a second answer in case this helps someone.For years we had no issues sending email from lets call it domain1.
• It’s really poorly explained on Sendgrid’s branded links help page, but you can see a mention of it here.
• I have examined the “rate limit” response headers and it appears that I am being limited to 10 requests per 5 minute block in the day.
• Basically I can make the email work, and the moment I attempt to add an attachment it doesn’t send it.
• I tried updating with msdb.dbo.sysmail_add_account_sp nad updating records but it too didn’t resolve and send email from Database mail.

To avoid this, always check your spelling and make sure you’re using the correct form, choosing. On the other hand, “chosing” is a misspelling of the word “choosing.” In the past, “chosing” may have been used as a variant, but it is no longer grammatically correct. Today, “choosing” is the standard form, and “chosing” should be avoided. The Sendgrid team said that they have to manually enable the TLS for each branded domain. And we have added an A record in DNS that points to our nginx proxy.

They have added notes in the Using the V2 API article but they still do not reference specific rate limits in the API documentation. There is no rate limit for the V2 and above mail/send endpoint. When it comes to Chosing vs Choosing, always remember that “choosing” is the correct form. Chosing is an outdated and incorrect variation that should be avoided in modern English. People mistakenly use it, thinking Choosing Stocks for Long-Term Investment it’s an acceptable variation, but it is not.

Common Phrases with Choosing

• By doing this we are now in compliance because we are sending from domain1.
• My best guess as to why some of our customers are able to send and most of the others can not (especially the FREE email accounts) you ask?
• On the other hand, “chosing” is a misspelling of the word “choosing.” In the past, “chosing” may have been used as a variant, but it is no longer grammatically correct.
• Chosing is an outdated and incorrect variation that should be avoided in modern English.
• If you write your own code maybe you should, the docs mention returning 429 HTTP status code when rate limit is reached.
• I then take the customers email address and use it as a REPLY TO email address INSTEAD OF the FROM email address.

The first response was pretty generic, but seems to indicate that the threshold is correct and says I really should be using webhooks to get the status. I haven’t found anything in the documentation saying this and I haven’t seen anything the specifies what the rate limits are. My best guess as to why some of our customers are able to send and most of the others can not (especially the FREE email accounts) you ask? The customers that were still working this way I believe must have had their email domain already authenticated someway via SendGrid. This is just a guess but there is about customers that were still able to send this way even though their email addresses did not match the domain1.com authenticated domain. I’m working on a product where we use SendGrid.com so send system e-mails to our customers’ end users.

If you have enabled click tracking in SendGrid, consider setting up a custom domain for URL redirection to maintain your brand identity and avoid potential reputation issues. Also, most if not all libraries do not seem to take rate limit into account. If you write your own code maybe you should, the docs mention returning 429 HTTP status code when rate limit is reached.

choose

By understanding the difference and applying the proper grammar rules, you can ensure your writing remains clear, accurate, and professional. So, next time you’re writing, make sure to use choosing in the present participle or gerund form to keep your content grammatically correct and free of common spelling mistakes. The word “choosing” is the correct form of the verb “choose” when used in the present participle, gerund, or continuous tense.

When you choose someone or something from a group of people or things, you decide which one you want.

Browse Nearby Words

These e-mails origniate from our own domain – let’s call it ourdomain.example. This is done by going through SendGrid’s authenticated domain flow to set up DNS records to validate the domain. The key difference between chosing and choosing is that chosing is incorrect and no longer used in contemporary English. Choosing is the proper form of the verb and should be used in all instances where you want to describe the act of making a selection. I pay extra to use the activity API to fix a problem that they should address themselves, so I’m very frustrated that they apply such restrictive rate limits, then change them without notice. It was the only way I could figure out to solve the issue without having to Authenticate EVERY CUSTOMERS email domain.

You should write your code in such a way that it waits for the X-Ratelimit-Reset before making another request. A common misspelling of “choose” is “chosing,” which is incorrect. Chosing, on the other hand, is not a proper form in contemporary English. While it might be found in older texts, it’s considered an error in modern writing.

I’m using the webhook to report non-delivery back to my application but I also need to use the activity API to resolve async bounce notifications. Async bounces are when a destination mail server accepts a message during the smtp session but subsequently sends a bounce notification email. When this occurs, SendGrid do not provide the detail of the bounced message in the webhook and the message is incorrectly reported as delivered in the SendGrid app. When asked, they respond that there’s nothing they can do about it, even though I have explained to them how I use their activity api to resolve this.

How to Use “Choosing” Correctly

If it’s worth switching, what free or affordable options are there? It is correct to say “choosing between” when referring to selecting from two options. “Choosing” is spelled as the present participle form of “choose,” following standard verb conjugation. In this article, we’ll break down the key differences, explain why choosing is the right option, and provide practical tips to avoid the chosing mistake in your writing. If anyone has any comments or questions about this I will be happy to answer as best as I can. Connect and share knowledge within a single location that is structured and easy to search.

I recommend prioritizing increasing your delivery rate and sender reputation, as this will help resolve many deliverability issues. However, it’s worth noting that we are still blocked by Gmail in some cases, which emphasizes how important it is to maintain consistent sending habits and build a good reputation over time. Your findings are correct in that we do limit this endpoint to 10 requests per 5 minutes. This is a hard limit that we do not have the means of raising. The Email Activity Feed as well as the Email Activity API endpoint are meant for troubleshooting specific issues and attaining detailed message metadata. For now it works 100% of the time now with the way I have it setup with sending FROM domain1 and using the customers email address as a REPLY TO.